For Sponsored Posts & Articles, please email us on 📧 networks.baseline@gmail.com

Part 7: Verify Import and Exports Remote Locations configurations on Cisco ACI APIC Dashboard

Today we are going to talk about the how to verify Import and Exports Remote Locations configurations on Cisco ACI APIC Dashboard. As you guys knew that APIC is a UCS based CIMC controller and we can check Import and Exports Remote Locations configurations on Cisco ACI APIC Dashboard.

What is Cisco ACI APIC?

One of the important pillar of Cisco ACI is APIC which is known as Cisco Application Policy Infrastructure Controller. It is single pane of glass for automation and management for the Cisco ACI fabric, policy enforcement, and health monitoring. It also optimizes performance and manages and operates a scalable multitenant Cisco ACI fabric.

Part 1: How to check the Hardware & Firmware using on Cisco ACI APIC
Part 2: How to Verify DNS, NTP, SNMP, Syslog on Cisco ACI APIC CIMC controller
Part 3: How to Verify ACI Fabric Health Score and Overall Faults
Part 4: How to Verify Cisco ACI Pod Date and Time
Part 5: Verification of Authentication Policies AAA and TACACS+ on Cisco ACI APIC Dashboard
Part 6 : Verification of Firmware Policies on Cisco ACI APIC Dashboard

Step 1:Log in to the APIC GUI Browse Admin → Import/Export → Remote Locations

Fig 1.1- APIC ACI Remote locations

Step 2:Verify that Remote Locations are configured according to design.

Step 3: If you want to run through the CLI, you need to SSH to APIC controller and run below command in order to get the information on the import and export remote locations

moquery -c fileARemoteHost

No comments

Note: Only a member of this blog may post a comment.