For Sponsored Posts & Articles, please email us on ­čôž networks.baseline@gmail.com

Part 4: How to Verify Cisco ACI Pod Date and Time

 Today we are going to talk about the verification of the ACI Pod Date and Time. As you guys knew that APIC is a UCS based CIMC controller and we can check ACI Pod Date and Time from the dashboard

What is Cisco ACI APIC?

One of the important pillar of Cisco ACI is APIC which is known as Cisco Application Policy Infrastructure Controller. It is single pane of glass for automation and management for the Cisco ACI fabric, policy enforcement, and health monitoring. It also optimizes performance and manages and operates a scalable multitenant Cisco ACI fabric.

Check out our earlier articles 

Part 1: How to check the Hardware & Firmware using on Cisco ACI APIC
Part 2: How to Verify DNS, NTP, SNMP, Syslog on Cisco ACI APIC CIMC controller
Part 3: How to Verify ACI Fabric Health Score and Overall Faults

Cisco ACI Pod Date and Time Verification

Step 1: Log in to the APIC GUI and Navigate to Browse System-> System Settings → Quota → Date and Time

Fig 1.1- Cisco ACI fabric


Step 2: Navigate to Browse Fabric-> Fabric Policies → Policies → Pod → Date and Time → Policy default

Fig 1.2- Cisco ACI Fabric Policies

Step 3:For each setting Verify configuration compliancy.

We will come up more in our next article to help you on Cisco ACI navigation and the procedure through the CLI and GUI.

No comments

Note: Only a member of this blog may post a comment.